Showing 49–64 of 73 results

PD-3000 Series Pit Depth Gages

Pit Depth Gage

The PD-3000 Series of gages inspects the depth of surface pitting. Each model of the PD-3000 gage includes the gage base, an indicator with .001” resolution, and a standard TPD 3/8” long contact point with a .020” end radius.
The PD-3000 gage is supplied with a .001” resolution indicator.
Require zeroing on a flat surface before inspection.
The gage also accepts other types and sizes of contact points for use in other applications, such as groove and thread depth inspection.

PDA – Digital Pressure Transmitter

PDA – Digital Pressure Transmitter

Product Specifications
Measuring Range 0…30″ Hg Vacuum to 0…5800 PSIG
Fittings ¼” NPT, ½” NPT, G ¼, or G ½
Housing 304 SS
Max. Temperature 176 °F (media)
Electrical Output 0(4)-20 mA or 0(4)-20 mA w/PNP or NPN Switch Output
Product Features
Large, Easy to Read 3-Digit LED Display
Fully Scalable Analog Signal Output
Available Analog Output with Adjustable Transistor Switch
Ceramic Pressure Sensing System for High Cycle Life

 

PDC – Digital Pressure Gauge

PDC – Digital Pressure Gauge

Product Specifications
Measuring Ranges 29…10150 PSI
Measuring Accuracy ±0.5% of F.S. ± 1 Digit
Max. Pressure 14500 PSI
Max. Media Temp 212 °F
Fittings ¼” NPT, G-¼B
Wetted Materials ≤725 PSI = SS, Ceramic, NBR, ≥1450 PSI = SS
Product Features
7-Segment LCD Bargraph Display
MIN / MAX Memory
Tare Function
Password Protected

 

PDD – Digital Pressure Switch

PDD – Digital Pressure Switch

Product Specifications
Switching range 0…30″ Hg Vacuum to 0…5800 PSIG
Fittings 1/4″ NPT, 1/2″ NPT. G 1/4, or G 1/2
Housing 304 SS
Max. Temperature 176 °F (media)
Product Features
Fully Programmable with Setpoint, Reset Point and Window Capability
Accuracy ±0.5% of Full Scale
Large, Easy to Read LED Display
Ceramic Pressure Sensing System for High Cycle Life

 

pH Electrode with Plastic Sheathing, APS-X5K

pH Electrode with Plastic Sheathing, APS-X5K

EXPERT-LINE
Measuring range: pH 0 up to 11
Connection: NPT 3/4″
Shock-proof because of plastic case
Temperature range: 0 up to 80°C
Pressure rating: up to 7 bar
Diaphragm: PTFE (teflon)
Temperature sensor: Pt 100 possible
Cable: 5 m fixed cable

PN-3000 Series Pin Seal Diameter Gages

Pin Seal Diameter Gage

The PN-3000 Series of gages inspect critical pin seal diameters on premium connectors ranging from 2 3/8”-13 3/8”. The gage also inspects seal tapers with the addition of stand-off plates. Each model covers a specific range of connection sizes, making the PN-3000 gages very versatile and economical.
These gages must be preset to a nominal predetermined dimension using gage blocks, Gagemaker’s Pin Seal Diameter Gage Setting Master, or Frame Standards.
The PN-3000 gage is supplied with a .0005” resolution indicator.

PPS – Plastic Paddle Flow Switch

PPS – Plastic Paddle Flow Switch

Product Specifications
Switching Range 9.5-28.5 GPM Water
Fittings 1″ NPT or G1 Male
Body Material Polysulfone
Max. Pressure 145 PSIG
Max. Temperature 225 °F
Product Features
Easy to Install
Low Cost
Bi-directional
Low Pressure Drop

 

Profile Gages

PROFILE GAGES

The TP Series of Thread Profile Gages are manufactured to tolerances of +.0002”, using EDM technology. These precision gages are ideal for quickly identifying each of the different thread forms named in the API Std. 5B and Specification 7. Profile gages can also be used to perform a visual inspection of a thread form for detecting chipped inserts, stretched threads, wide first threads, or rolled over threads. Special profiles are available and quoted upon request.

SM – High Pressure All-Metal Flowmeter and Switch

SM – High Pressure All-Metal Flowmeter and Switch

Product Specifications
Switching Range 0.04…0.6 to 4…40 GPM Water, 0.05…1 to 5…130 SCFM Air
Fittings 1/4″…1-1/4″ NPT
Body Material Brass, SS
Max. Pressure 3600 PSIG (Brass)/5000 PSIG (SS)
Max. Temperature 160 °F (PP Float)/240 °F (Brass/SS Float)
Accuracy ± 5% F.S.
Product Features
±5% Full Scale Accuracy
Maximum Pressure – 3600 PSI/5000 PSI
Direct Reading Scales for Water and Air
Small, Compact Design
Easy to Install
Vertical and Horizontal Flows

SMN – Flow Switch for Liquids

SMN – Flow Switch for Liquids

Product Specifications
Switching Range 0.4…13 GPM water
Switch Point Approx. 0.25…1 GPM Falling
Fittings 1″ FNPT
Body Material Ni-plated Brass or St. Steel
Max. Pressure 3600 PSIG (Brass) / 5000 PSIG (SS)
Max. Temperature 212 °F
Switch N/O or SPDT Reed contact
Product Features
Low Switch Point
Low Pressure Drop at High Flows
Brass or SS Construction
Maximum Pressure – 3600/5000 PSIG
Maximum Temperature – 212 °F
N/O or SPDT Reed Switch

 

Standard Contact Points (Sold Individually)

Contact Points

Gagemaker manufactures standard ball and special application contact points and contact points.
The contact points are made of spherical carbide and are interchangeable between gages. Contact point diameters are manufactured to tolerances of +.0002”. Most gages require two contact points.
Both threaded and straight shanks are available. Threaded shanks are #4-48 UNF. Metric and special diameter contact points are quoted upon request.

TM – Universal, Special Purpose Coriolis Mass Flowmeter

TM – Universal, Special Purpose Coriolis Mass Flowmeter

Product Specifications
Mass Flow Measuring Ranges 0.003…0.3 Lb./Min. through 220…2400 Lb./Min.
Sizes ¼”…3″
Accuracy (Mass Flow) ±0.1% of reading
Fittings NPT, BSPP, SAE Thread; ANSI, DIN, JIS Flange. Others on request
Max. Operating Temperature Up to 500 °F depending on model
Product Features
Widest Range of Wetted Materials Available in the Industry
Flow Tubes and Fittings Available in 316L Stainless Steel, Hastelloy® C-22, Nickel Alloy, Monel, Tantalum, Titanium and Inconel®.
Liquid or Gas Flow Measurement
Extreme Pressure and Temperature Ratings
Simultaneous Mass Flow, Density, Temperature and Volume Flow Measurements
Heat Jacketing Available
HART®, MODBUS (RS-485) and Profibus-PA® Available

 

TNF – Gas-Filled Capillary Thermometer

TNF – Gas-Filled Capillary Thermometer

Product Specifications
Measuring Range -40…100 °F to 32…1100 °F
Fittings ½” NPT…1″ NPT, G½…G1
Housing Material Painted Steel, Aluminum or SS
Housing Diameter 63, 80, 100, 160 & 250 mm
DIN Accuracy Category 1.0, 1.6
Product Features
Gas-Filled, Capillary Thermometer
Dial Sizes – 63, 80, 100, 160 & 250 mm
Ranges of -40…100 °F to 32…1100 °F
Available With Up To Four Switches

 

TNK – RTD Temperature Sensors

TNK – RTD Temperature Sensors

Product Specifications
Sensors Pt100, Ni100, Pt1000, Class A or B, NTC (5 kΩ at 25 °C), 2, 3- or 4 Lead
Wetted Materials 316L SS, Ni-Plated Brass or Salt-Water Resistant Bronze
Fittings G 1/2, 1/2″ NPT, M18x1.5
Sensing Range -80…150 °C
Product Features
-80…150 °C Measuring Range
50 Bar Maximum Pressure
Typical Applications Include Shipbuilding, Diesel Engines, Engine Building, Mechanical Engineering and Power Unit Construction

TNS – Gas-Filled Rigid Stem Thermometer

TNS – Gas-Filled Rigid Stem Thermometer

Product Specifications
Measuring Range -40…100 °F to 32…1100 °F
Fittings Lower or Back Mount, ½” NPT…1″ NPT, G-1/2…G-1
Housing Material Aluminum or SS
DIN Accuracy Category 1.0, 1.6
Diameter of Housing 63, 80, 100, 160 & 250 mm
Options Switch Contacts, Oil or Glycerine Filling
Product Features
Gas-Filled, Rigid Stem Thermometer
Dial Sizes – 63, 80, 100, 160 & 250 mm
All Stainless Steel Wetted Parts
Ranges of -40…100 °F to 32…1100 °F
Available With Up To Four Switches

Transmitter for pH-Value and ORP APM-1

Transmitter for pH-Value and ORP APM-1

COMPACT-LINE
Measuring range: pH -2 bis 16, Redox -1500..+1500 mV
Pt100/Pt1000: -50..+250°C, 0(4)-20 mA
With panel mounted housing or field mounted housing
Input: 1x pH/Redox, 2 binary inputs
1x temperature/resistance/standard signal
graphic display w. backlight max. 3 values, trend, bargraph
Output: 2 relays (SPDT) 1 supply voltage f. sensors 17 VDC
freely programmable, math and logic module
Option: plug-in boards
analogue output, power supply snesors, RS485, datalogger, Profibus, relays