Showing 65–73 of 73 results

Transmitter for Specific Conductivity, ACM-1

Transmitter for Specific Conductivity, ACM-1

COMPACT-LINE
measuring range: 0 up to 200 mS/cm
With panel mounted housing or field mounted housing
Input: 1x conductivity/resistance/TDS, 2 binary inputs
1x temperature/resistance/standard signal
graphic display w. backlight max. 3 values, trend, bargraph
Output: 2 relays (SPDT) 1 supply voltage f. sensors 17 VDC
freely programmable, math and logic module
Option: plug-in boards
analogue output, power supply snesors, RS485, datalogger, Profibus, relays)

Transmitter for Turbidity Meter ATT-K

Transmitter for Turbidity Meter ATT-K

COMPACT-LINE
0 up to 200 mS/cm
With panel mount housing or field mounting housing
Display of conductivity and temperature with LEDs
analogue actual-value output scaleable
2 relays for control functions (PID) programmable
2 binary inputs
1 binary output (alarm contact or temperature limit contact)

Transmitters for pH-Value and ORP, APM-X

Transmitters for pH-Value and ORP, APM-X

EXPERT-LINE
Measuring range: pH: 0 up to 14 pH
Redox: -1500 up to +1500
With panel mounted housing or field mounted housing
Large text LC-Display
analogue actual-value output scaleable
Alarm relays
Two additional relays for use as control contacts
two digital inputs

TRS – Thermal Reed Temperature Switch

TRS – Thermal Reed Temperature Switch

Product Specifications
Switch Point Range 50…248 °F
Fittings ¼”…1″ NPT, (Brass or 304 SS)
Electrical Connection 1.5m Silicone-Jacketed Cable
Switching Accuracy ± 5 °F
Typical Hysteresis 7…14 °F
Product Features
Brass or Stainless Steel Wetted Parts
Simple Installation
Highly Repeatable Setpoint
Long Service Life and Operational Reliability

TSK – Flap Style Flowmeter

TSK – Flap Style Flowmeter

Product Specifications
Flow Range 2.2…15 GPM to 880…6600 GPM
Accuracy ±2.5% of Reading
Fittings 1½”…24″ ANSI or DIN Wafer
Max. Pressure Per ANSI CL 150/300 or DIN PN 40 depending on model.
Max. Operating Temperature Up to 570 °F depending on model
Product Features
Available Materials of Construction Include Stainless Steel, Hastelloy® C22, Polypropylene and PTFE
Line Sizes from 1½”…24″
Can Be Supplied for Horizontal or Vertical Piping Runs
Flap Measuring Technique Yields Very Low Head Loss
Excellent Tolerance to Dirty Liquids and Suspended Solids
Optional Setpoint Switches, 4-20 mA with HART® or Profibus-PA®
Superior Dampening System for Stable Flow Readings
Calibrations for Media Density Available

 

Turbidity Meter ATA-K

Turbidity Meter ATA-K

Absorbtion method (infrared)
Measuring range: 0…4 CU
Connections: DIN-/ ANSI-flange, NPT, BSP-thread, hygenic connection
Material: st. st.
Max. pressure: 16 bar
Max. temperature: 0…10°C (short-time 120°C)
Measuring Accuracy: +/-2% FS
Output: 4…20 mA, 2 limit switches

Turbidity Meter ATL

Turbidity Meter ATL

Measuring range: 0…3 CU
Connections: DIN-/ ANSI-flange, NPT, BSP thread, hygenic connection
Material: st. st.
Max. pressure: 10 bar
Max. temperature: 0…100°C
Output: 4…20 mA, 2 limit switches

Turbidity Meter ATS-K

Turbidity Meter ATS-K

Dual Light Scattering-method (11°)
Measuring range: 0…500 ppm
Connections: DIN-/ ANSI-flange, NPT, BSP thread, hygenic connection
Material: st. st.
Max. pressure: 16 bar
Max. temperature: 0…190°C
Measuring Accuracy: +/- 2% FS
Output: 4…20 mA, 2 limit switches

TWR – Temperature Switch for Liquids

TWR – Temperature Switch for Liquids

Product Specifications
Available Switch Points 86…248 °F
Fittings 3/4″ NPT, Ni-Plated Brass or 304 (1.4301) SS
Electrical Connection DIN 43 650 Plug
Switching Accuracy ± 9…13 °F
Hysteresis Max. 36 °F
Product Features
Simple Installation
Position Independent
Ni-Plated Brass or SS Construction
Optional Signal Lamp